Windows Software | DxO Optics Pro v6.1.2.7540 Portable | Rar | 89.6 MB
DxO Optics Pro professional program for the improvement and adjustment of your collection of digital photos. This decision has many advanced technologies, with which you can adjust the brightness, contrast, color balance, eliminate distortion and improved clarity of images, correct color and exposure on the edges and corners of the photos, adjust white balance, taking into account the color temperature and more. The principle of DxO Optics is based on the projects. You load a set of photos from your hard drive, flash cards or any other medium, then sistematiziruete material describing the necessary adjustments. In addition, DxO Optics Pro can be connected as a plug in graphics editor Adobe Photoshop.[/center]
All work DxO Optics Pro resembles the work of RAW converters. And it is not surprising, because the basic application DxO Optics lies in the processing of digital negatives. It is interesting to note that the original program was developed to correct geometric distortion optics. Then add components in a product other deficiencies corrected optics. Soon there were a means to support RAW modern cameras and basic tools systematization of the material. And where the RAW can not do without the exposure control and color. As a result of, in general, a simple utility to correct various distortions, DxO Optics has grown into a powerful software product that allows you to perform a wide range of adjustments to images.
During the first start you are offered a choice of three options for options. The first of these involves a fully automatic mode, the second control with a wizard, and a third expert, reveals all the possibilities of software. By default selected third paragraph. Probably, it is reasonable. It is better to use all the features of the program and then decide whether they should have in everyday life. If not, then you can go to a more simple regimens. But, most likely, this need not arise, because the interface DxO Optics competently structured, and homogeneous clutter options never arises. Program can not be called a very simple, but the consistency and predictability of user interaction significantly simplifies the introduction and subsequent work with the product.
DxO Optics has an interesting opportunity for not just use a batch mode adjustment of the material, and do it comfortably. You can select multiple thumbnails within the project and create one single stack (stack). In the future, all adjustments are automatically applied to all documents within the stack. Visually, a stack of pictures is different from the individual documents white frame and adding the word stack with serial number to the filename.
It is worth to note that the current state of the project at any time to save to your hard drive. For instance, you returned from a wedding, and want to process thousands of photos. Evening, you valites feet, but tears curiosity, what was the result? You can start work in the evening, fixing dozens of key personnel, and all other operations until the next day. Suffice it to only run the program and open the project. By the way, you can work with several projects simultaneously. At first glance, it is not necessary. However, the benefits of such a possibility is viewed in if you want to remember what adjustments result in such a beautiful photos. It s enough just to open the second draft and switch to it using a special menu on the left side of the bottom row of images.
Key features:
Optical photo correction
Converting RAW files to other graphic formats
Optimize species photographs
Excellent work with the distortions and distortsiey caused by the optics
Removal of various noise, dust and other distortions
Easy to use thought out interface
Ability to work with Photoshop, Lightroom and Flickr
New in version 6:
Improved image quality at high ISO
Improved tools for correction of optical defects
Automatic restoration of exposure for the most difficult subjects
Completely redesigned and more intuitive interface
Personalization of the interface to improve productivity
Support for new cameras and lenses
Improved performance of the overall program.
What s New in 6.1.2:
Version 6.1.2 of DxO Optics Pro for Windows adds support for 5 new cameras:
Pentax K 7
Sony Alpha DSLR A500
Sony Alpha DSLR A550
Panasonic Lumix DMC LX3
Panasonic Lumix DMC GH1
In addition, 81 new DxO Optics Modules are now available to DxO Optics Pro users, covering the Canon 7D, 20D, 30D, 40D, 50D, REBEL XTi/400D, DIGITAL REBEL XSi/450D and REBEL T1i/500D; Fuji S5; Nikon D200, D300, D300s, D50, D3000, D5000 and D80; Panasonic LX3 and GH1; Pentax K 7; and Sony A230, A330, A500 and A550.
Improvements since version 6.1.1
Suppression of a color cast that might be visible at very high ISO in dark areas of pictures shot with Nikon or Pentax camera bodies.
Correction of a crash occuring by some customers when using “Customize” tab.
OS: WindowsALL
NET Framework 3.5
ShareDuring the first start you are offered a choice of three options for options. The first of these involves a fully automatic mode, the second control with a wizard, and a third expert, reveals all the possibilities of software. By default selected third paragraph. Probably, it is reasonable. It is better to use all the features of the program and then decide whether they should have in everyday life. If not, then you can go to a more simple regimens. But, most likely, this need not arise, because the interface DxO Optics competently structured, and homogeneous clutter options never arises. Program can not be called a very simple, but the consistency and predictability of user interaction significantly simplifies the introduction and subsequent work with the product.
DxO Optics has an interesting opportunity for not just use a batch mode adjustment of the material, and do it comfortably. You can select multiple thumbnails within the project and create one single stack (stack). In the future, all adjustments are automatically applied to all documents within the stack. Visually, a stack of pictures is different from the individual documents white frame and adding the word stack with serial number to the filename.
It is worth to note that the current state of the project at any time to save to your hard drive. For instance, you returned from a wedding, and want to process thousands of photos. Evening, you valites feet, but tears curiosity, what was the result? You can start work in the evening, fixing dozens of key personnel, and all other operations until the next day. Suffice it to only run the program and open the project. By the way, you can work with several projects simultaneously. At first glance, it is not necessary. However, the benefits of such a possibility is viewed in if you want to remember what adjustments result in such a beautiful photos. It s enough just to open the second draft and switch to it using a special menu on the left side of the bottom row of images.
Key features:
Optical photo correction
Converting RAW files to other graphic formats
Optimize species photographs
Excellent work with the distortions and distortsiey caused by the optics
Removal of various noise, dust and other distortions
Easy to use thought out interface
Ability to work with Photoshop, Lightroom and Flickr
New in version 6:
Improved image quality at high ISO
Improved tools for correction of optical defects
Automatic restoration of exposure for the most difficult subjects
Completely redesigned and more intuitive interface
Personalization of the interface to improve productivity
Support for new cameras and lenses
Improved performance of the overall program.
What s New in 6.1.2:
Version 6.1.2 of DxO Optics Pro for Windows adds support for 5 new cameras:
Pentax K 7
Sony Alpha DSLR A500
Sony Alpha DSLR A550
Panasonic Lumix DMC LX3
Panasonic Lumix DMC GH1
In addition, 81 new DxO Optics Modules are now available to DxO Optics Pro users, covering the Canon 7D, 20D, 30D, 40D, 50D, REBEL XTi/400D, DIGITAL REBEL XSi/450D and REBEL T1i/500D; Fuji S5; Nikon D200, D300, D300s, D50, D3000, D5000 and D80; Panasonic LX3 and GH1; Pentax K 7; and Sony A230, A330, A500 and A550.
Improvements since version 6.1.1
Suppression of a color cast that might be visible at very high ISO in dark areas of pictures shot with Nikon or Pentax camera bodies.
Correction of a crash occuring by some customers when using “Customize” tab.
OS: WindowsALL
NET Framework 3.5
0 comments:
Post a Comment